Numerical Analysis of the 3D Cross Flow between CorrugatedParallel Plates
Publish place: 12th Conference of Fluid Dynamics
Publish Year: 1388
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,574
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CFD12_138
تاریخ نمایه سازی: 18 خرداد 1388
Abstract:
The 3D cross flow between parallel corrugated plated with intersecting directions of corrugation is numerically modeled as a laminar, incompressible, steady flow. In order to solve the governing equations of flow, an analytical mathematical transformation is used to transform the complicated physical domain to a cubic computational one. It is tried to minimize the minimum gap between the wavy plates up to 5% of' wavelength. The FDM discretiZ1ltion along with Chorin's artificial compressibility method is used to solve the governing equations and results are presented as streamlines and friction factor. Investigations result that if the amplitude to wavelength ratio increases, the friction factor growes with regards to Reynolds number. The increase in pressure drop of wavy plates regarding to flat plate situation is up to 450% compared to flat plates in investigated range of Reynolds numbers. Streamlines at various Reynolds numbers show that fluid particles in upper and lower 'waves, tend to move in a helical path and swirl along the waves corridors, but the particles which are positioned in the gap between upper and lower waves move diagonally across the wavy plates. They also obey a helical pattern but the size of these helical patterns decrease when Reynolds number increase. Streamlines in upper and lower waves, which are near the gap between the plates, at low Reynolds numbers move helically across the domain but when Reynolds number increases, they tend to move along the wave directions.
Keywords: corrugated plates, wavy, friction factor, pressure drop
Keywords:
Authors
E Tavakol
PhD Student Faculty of Mechanical Engineering Amirkabir University of Technology
R Hosseini
Associate Professor Faculty of Mechanical Engineering Amirkabir University of Technology
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :