سمتهای علمی و اجرایی در دانشگاهها و مراکز علمی کشور
سمتهای علمی و اجرایی در مجلات و ژورنالهای معتبر ایران
ISI Papers
- "Effects of non-isothermal annealing on microstructure and mechanical properties of severely deformed aluminum samples: Modeling and experiment", Elsevier BV, (2019), Vol 29, No 6: 1127-1137
- "Cell-structure and flow stress investigation of largely strained non-heat-treatable Al-alloys using dislocation based model", Elsevier BV, (2019), Vol 739, No : 167-172
- "Flow Stress Evolution in Further Straining of Severely Deformed Al", Springer Science and Business Media LLC, (2019), Vol 50, No 5: 2371-2380
- "Effect of electropulsing on microstructure and hardness of cold-rolled low carbon steel", Elsevier BV, (2019), Vol 8, No 3: 3114-3125
- "Non-isothermal aging of a high-Zn-containing Al–Zn–Mg–Cu alloy: microstructure and mechanical properties", Informa UK Limited, (2017), Vol 34, No 6: 688-697
- "Post Deformation at Room and Cryogenic Temperature Cooling Media on Severely Deformed 1050-Aluminum", Springer Science and Business Media LLC, (2018), Vol 24, No 2: 401-414
- "On the natural aging behavior of Aluminum 6061 alloy after severe plastic deformation", Elsevier BV, (2013), Vol 580, No : 202-208
- "Microstructural Evolution and Fracture Behavior of Friction-Stir-Welded Al-Cu Laminated Composites", Springer Science and Business Media LLC, (2013), Vol 45, No 1: 361-370
- "The Effect of Direct and Cross-Rolling on Mechanical Properties and Microstructure of Severely Deformed Aluminum", Springer Science and Business Media LLC, (2013), Vol 23, No 1: 115-124
- "Prediction of the mechanical properties of rods after cold forging and heat treatment", Springer Science and Business Media LLC, (2013), Vol 69, No 9-12: 2071-2079
- "Deformation Behavior of 6061 Aluminum Alloy Through Tube Channel Pressing: Severe Plastic Deformation", Springer Science and Business Media LLC, (2012), Vol 21, No 10: 2099-2105
- "Microstructure evolutions after friction stir welding of severely deformed aluminum sheets", Elsevier BV, (2012), Vol 40, No : 364-372
- "Hot deformation behavior of hot extruded Al–6Mg alloy", Elsevier BV, (2012), Vol 535, No : 216-221
- "Tearing energy of an annealed bilayer sheet through multiple and single tensile tests", Elsevier BV, (2011), Vol 528, No 29-30: 8800-8803
- "Mechanical properties and microstructure of resistance spot welded severely deformed low carbon steel", Elsevier BV, (2011), Vol 529, No : 237-245
- "Microstructural evolution during ultra-rapid annealing of severely deformed low-carbon steel: strain, temperature, and heating rate effects", Springer Science and Business Media LLC, (2016), Vol 23, No 7: 779-792
- "Microstructure and mechanical properties of an Al–Mg–Si tube processed by severe plastic deformation and subsequent annealing", Elsevier BV, (2015), Vol 640, No : 42-50
- "Retraction notice to “Nano-structure and mechanical properties of 0–7 strained aluminum by CGP: XRD, TEM and tensile test” [Mater. Sci. Eng. A 526 (2009) 219–224]", Elsevier BV, (2015), Vol 640, No : 480
- "Dependency modeling of steady state grain size on the stacking fault energy through severe plastic deformation", Elsevier BV, (2015), Vol 159, No : 410-412
- "Friction Stir Welding of Al-Cu Bilayer Sheet by Tapered Threaded Pin: Microstructure, Material Flow, and Fracture Behavior", Springer Science and Business Media LLC, (2015), Vol 46, No 6: 2544-2553
- "Metallurgical characteristics and failure mode transition for dissimilar resistance spot welds between ultra-fine grained and coarse-grained low carbon steel sheets", Elsevier BV, (2015), Vol 637, No : 12-22
- "Microstructure generation of severely deformed materials using Voronoi diagram in Laguerre geometry: Full algorithm", Elsevier BV, (2011), Vol 50, No 9: 2698-2705
- "The effect of constrained groove pressing on grain size, dislocation density and electrical resistivity of low carbon steel", Elsevier BV, (2011), Vol 32, No 6: 3280-3286
- "Electrical annealing of severely deformed copper: microstructure and hardness", Springer Science and Business Media LLC, (2017), Vol 24, No 10: 1158-1168
- "Development of a novel severe plastic deformation method for tubular materials: Tube Channel Pressing (TCP)", Elsevier BV, (2011), Vol 528, No 15: 5066-5072
- "The annealing phenomena and thermal stability of severely deformed steel sheet", Elsevier BV, (2011), Vol 528, No 15: 5212-5218
- "Recrystallization behavior of multi-directionally forged over-aged and solution treated Al-Cu-Mg alloy during non-isothermal annealing", Elsevier BV, (2017), Vol 132, No : 250-256
- "Rapid annealing of severely deformed low carbon steel in subcritical temperature range", Springer Science and Business Media LLC, (2017), Vol 23, No 5: 984-993
- "Multi Directional Forging of 2024 Al Alloy After Different Heat Treatments: Microstructural and Mechanical Behavior", Springer Science and Business Media LLC, (2016), Vol 70, No 7: 1707-1719
- "Effect of concurrent precipitation on the texture evolution during continuous heating of multi directionally forged solution treated Al-Cu-Mg alloy", Elsevier BV, (2017), Vol 131, No : 399-405
- "Development a dislocation density based model considering the effect of stacking fault energy: Severe plastic deformation", Elsevier BV, (2014), Vol 95, No : 250-255
- "Deformation inhomogeneity in flattened copper wire", Elsevier BV, (2007), Vol 28, No 7: 2047-2053
- "Two-internal variable thermodynamics modelling of severe plastic deformation: dislocation and flow stress evolutions", Informa UK Limited, (2015), Vol 31, No 14: 1788-1793
- "Thermal stability during annealing of friction stir welded aluminum sheet produced by constrained groove pressing", Elsevier BV, (2013), Vol 45, No : 222-227
- "Thermal stability of aluminum after friction stir processing with SiC nanoparticles", Elsevier BV, (2015), Vol 80, No : 41-50
- "Prediction of ferrite grain size and tensile properties of a low carbon steel", Informa UK Limited, (2004), Vol 20, No 1: 106-110
- "Dislocation density and flow stress modeling of nanostructured Al–SiCp composite during accumulative roll bonding", Elsevier BV, (2013), Vol 67, No : 359-363
- "Severe plastic deformation of 6061 aluminum alloy tube with pre and post heat treatments", Elsevier BV, (2013), Vol 563, No : 60-67
- "Mechanical behavior and texture development of over-aged and solution treated Al-Cu-Mg alloy during multi-directional forging", Elsevier BV, (2018), Vol 135, No : 221-227
- "Effects of heat input in friction stir welding on microstructure and mechanical properties of AA3003-H18 plates", Elsevier BV, (2015), Vol 25, No 7: 2147-2155
- "Modelling the temperature rise effect through high-pressure torsion", Informa UK Limited, (2016), Vol 32, No 12: 1218-1222
- "Effects of cold severe plastic deformation and heating on dendritic and non-dendritic structures: A356 alloy", Maney Publishing, (2014), Vol 27, No 5: 312-320
- "Microstructrual evolution of aluminum 6061 alloy through tube channel pressing", Elsevier BV, (2014), Vol 615, No : 139-147
- "Heating rate effect on particle stimulated nucleation and grains structure during non-isothermal annealing of multi-directionally forged solution treated AA2024", Elsevier BV, (2017), Vol 127, No : 317-324
- "The Effect of Cu Powder During Friction Stir Welding on Microstructure and Mechanical Properties of AA3003-H18", Springer Science and Business Media LLC, (2014), Vol 45, No 9: 3882-3891
- "Microstructure and Mechanical Properties in Dissimilar Butt Friction Stir Welding of Severely Plastic Deformed Aluminum AA 1050 and Commercially Pure Copper Sheets", Elsevier BV, (2014), Vol 30, No 8: 826-834
- "The Correlation of Stir Zone Texture Development with Base Metal Texture and Tool-Induced Deformation in Friction Stir Processing of Severely Deformed Aluminum", Springer Science and Business Media LLC, (2016), Vol 48, No 1: 188-197
- "Effects of non-isothermal annealing on microstructure and mechanical properties of severely deformed 2024 aluminum alloy", Elsevier BV, (2017), Vol 27, No 1: 1-9
- "A comparison of low carbon steel and Al–Mg alloy sheets in quasi-static tearing collisions", Elsevier BV, (2009), Vol 30, No 4: 1333-1336
- "Combination of the Upper Bound and Potts Models for Simulation of Microstructure in Wire Drawing and Annealing Processes", Springer Science and Business Media LLC, (2009), Vol 18, No 1: 26-31
- "Modeling nano-scale grain growth of intermetallics", Springer Science and Business Media LLC, (2009), Vol 32, No 1: 19-21
- "Monte Carlo simulation of recrystallization with hardness input of cold worked metal", Elsevier BV, (2008), Vol 496, No 1-2: 389-392
- "Simulation the ultra-fine microstructure evolution during annealing of metal processed by ECAP", Elsevier BV, (2008), Vol 43, No 2: 309-312
- "On the modeling of the static recrystallization considering the initial grain size effects", Elsevier BV, (2008), Vol 486, No 1-2: 202-207
- "Relationship between the stored energy and indentation hardness of copper after compression test: models and measurements", Springer Science and Business Media LLC, (2008), Vol 43, No 10: 3500-3504
- "A study on the computation of the redundant deformation factor in wire drawing of austenitic 304 stainless steel", Elsevier BV, (2008), Vol 199, No 1-3: 230-233
- "Modeling of austenite to ferrite transformation", Springer Science and Business Media LLC, (2012), Vol 35, No 3: 395-398
- "Modeling the effect of redundant strain factor on the microstructure inhomogeneity of drawn and annealed wire", Springer Science and Business Media LLC, (2007), Vol 14, No 3: 435-446
- "Modeling of induced empirical constitutive relations on materials with FCC, BCC, and HCP crystalline structures: severe plastic deformation", Springer Science and Business Media LLC, (2009), Vol 47, No 9-12: 1033-1039
Conference Papers
- پایداری حرارتی -مکانیکی آلومینیوم تغییر شکل پلاستیک شدید داده شده جوشکاری شده با فرآیند اصطکاکی- تلاطمی و پودر هیبریدی آلومینا/گرافیت: اثر نسبت سرعت دورانی ابزار به سرعت خطی وتعداد پاس جوشکاری ارائه شده در 4th International Conference on Welding and Non Destructive Testing & 22nd National Conference on Welding & Inspection & 11th National Conference on NDT (1400)
- Thermo-mechanical stability of severely plastic deformed aluminum joined by friction stir welding and graphite/Al۲O۳ hybrid powder: The effect of rotation speed to traverse speed ratio and number of welding passes ارائه شده در 4th International Conference on Welding and Non Destructive Testing & 22nd National Conference on Welding & Inspection & 11th National Conference on NDT (1400)
- Effect of Pre- and Post-Heat Treatment on Severely Plastic Deformed Low-Carbon Steels ارائه شده در 1st International Conference & 4th National Conference on Materials, Metallurgy & Mining (1399)
- تاثیر نورد سرد و گرم بر خواص مکانیکی مس تغییر شکل شدید یافته ارائه شده در The 6th International Conference on Exhibitiion on Metallurgy and Materials Engineering (1396)
- بررسی تاثیرحرارت ورودی برروی خواص مکانیکی وریزساختاری دراتصال آلیاژAA3003-H18 توسط جوشکاری اصطکاکی اغتشاشی ارائه شده در The second International and the Seventh Joint Conference of Iranian Metallurgical Engineering and Iranian Foundaryman Scintific Societies (1392)
- بررسی اثر فرآیند جوشکاری اصطکاکی -اغتشاشی (FSW) بر جذب انرژی ورقهای آلومینیومی 1050 ارائه شده در 14th National Conference on welding and Inspection & 3th National Conference on NDT (1392)
- بررسی خواص مکانیکی و ریزساختار اتصال غیرهم جنس ورق های مسی وآلومینیومی به شدت تغییر شکل یافته به روش جوشکاری اصطکاکی-اغتشاشی ارائه شده در 1st International and 6th Joint Conference of Iranian Society of Metallurgical Engineers and the scientific community of Casting (1391)
- بررسی خواص مکانیکی اتصال غیرهم جنس ورق های مسی و آلومینیمی به شدت تغییر شکل یافته به روش جوشکاری اصطکاکی-اغتشاشی ارائه شده در Thirteenth National Conference welding and Inspection and Second National Conference on NDT (1391)
- تعیین سینتیک تبلورمجدد ورقهای مسی پس از تغییرفرم پلاستیک شدید درقالب دندانهای ارائه شده در First National Copper Conference (1390)
- بررسی تاثیر عملیات حرارتی بر نانو ساختار مکانیکی آلیاژ آلومینیوم 7075 تحت فرآیند اصطکاکی اغتشاشی ارائه شده در 5th Joint Conference of Iranian Society of Metallurgical Engineers and the scientific community of Casting (1390)
- بررسی پارامترهای شکل دهی در فرآیند پرس در کانال لوله ای: آزمایش و شبیه سازی ارائه شده در 5th National Conference of Metals and Materials Formaing (1390)
- بررسی ریزساختار و خواص آلیاژ آلومینیوم 7075 تحت فرایند اصطکاکی اغتشاشی ارائه شده در 5th National Conference of Metals and Materials Formaing (1390)
- بررسی رفتار آنیلی مس به شدت تغییر شکل یافته ارائه شده در 5th National Conference of Metals and Materials Formaing (1390)
- بررسی تأثیر مقادیر بالای کرنش اولیه در ورق فولادی کم کربن بر ریزساختار و خواص مکانیکی جوش مقاومتی نقطه ای ارائه شده در The fourth joint conference of the Association of Metallurgical Engineers and the Iranian Foundry Association (1389)
- شبیه سازی آزمون کشش نانوسیم نیکلی با استفاده از روش دینامیک مولکولی ارائه شده در The fourth joint conference of the Association of Metallurgical Engineers and the Iranian Foundry Association (1389)
- بررسی ریزساختار و خواص مکانیکی ورق فولادی کم کربن پس از تغییر شکل پلاستیک شدید در قالب کنگره ای ارائه شده در Steel Symposium 1388 (1388)
- تاثیر تغییر شکل و آنیل بر جذب انرژی ورق های آلیاژ آلومینوم سری 5000 حین فرآیند پارگی ارائه شده در 4th National Conference of Metals and Materials Formaing (1387)
- اثر اندازه دانه اولیه بر توزیع خواص مکانیکی سیم مسی نورد شده ارائه شده در 4th National Conference of Metals and Materials Formaing (1387)
- تاثیر عملیات حرارتی بر توزیع سختی مفتول های فولادی کم کربن پس از فرآیند کشش سیم و پیرکرنشی استاتیکی ارائه شده در 4th National Conference of Metals and Materials Formaing (1387)
- تعیین میدان کرنش وپخش جانبی در فرآیند نورد تخت سیم به کمک آنالیز عددی ارائه شده در 9th Congress of the Iranian Metallurgical Society (1384)
- پیش بینی اندازه دانه فریت و خواص کششی یکنوع فولاد ساده کم کربن ارائه شده در 06th Congress of the Iranian Metallurgical Society (1381)
Journal Papers
- اثر نسبت سرعت دورانی ابزار به سرعت خطی و تعداد پاس جوشکاری بر پایداری حرارتی-مکانیکی آلومینیوم تغییر شکل پلاستیک شدید داده شده جوشکاری شده با فرایند اصطکاکی-تلاطمی و پودر هیبریدی آلومینا/گرافیت منتشر شده در Journal Of Welding Science and Technology of Iran (1401)
- تاثیر دمای آنیل فوق سریع بر ریزساختار فولاد کم کربن به شدت تغییر شکل یافته منتشر شده در Journal of New Materials (1399)