Numerical Analysis of Multi-Directional Forging of AISI 52100 Steel
Publish place: International Conference on Manufacturing Engineering
Publish Year: 1398
نوع سند: مقاله کنفرانسی
زبان: English
View: 391
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME16_001
تاریخ نمایه سازی: 11 اسفند 1398
Abstract:
Severe Plastic Deformation (SPD) methods are used to achieve fine-grain microstructures. Mechanical properties are highly dependent to the microstructure of the specimen. Higher strength and hardness could be achieved by a fine microstructure. Multi-directional forging is a new method of severe plastic deformation. In the present study, DEFORM commercial software was used to investigate the hot multi-directional forging of AISI 52100 steel. Stress, strain, temperature, and dynamic recrystallization were investigated as the process variables. The specimen was subjected to forging in three passes where in each pass the forging direction was perpendicular to the previous forging direction. The maximum effective stress and strain were 176 MPa and 2.72, respectively. The results show that there is a temperature rise during the process which is corresponding to the plastic deformation. The initial and final temperatures were 800 and 838 ºC, respectively. The full dynamic recrystallization also occurred in the whole volume of the specimen after the third pass. The well-known Avrami model was used to predict kinetics of dynamic recrystallization.
Keywords:
SPD-FEM-Multi directional forging-AISI 52100 steel.
Authors
Moosa Sajed
PhD student, Mechanical Engineering Department, University of Birjand, Birjand, Iran
S. M. Hossein Seyedkashi
Associate Professor, Mechanical Engineering Department, University of Birjand, Birjand, Iran