DETERMINATION OF SEISMIC BEARING CAPACITY FACTOR NYE USING MODIFIED PSEUDO-DYNAMIC METHOD

Publish Year: 1398
نوع سند: مقاله کنفرانسی
زبان: English
View: 413

This Paper With 8 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

SEE08_050

تاریخ نمایه سازی: 27 خرداد 1399

Abstract:

Estimating the seismic bearing capacity of soil under shallow foundation is important for seismically active areas. A new approach is suggested for the computation of bearing capacity factor, Nγe considering logspiral failure mechanisms. This paper uses modified pseudo-dynamic method to estimate the dimensionless seismic bearing capacity factor Nγe for dry sand underlying a surface strip footing. Soil amplification is considered inherently in this method and seismic acceleration is found to have significant effect on Nγe. The present study shows that the value of Nγe considering kh=0.1, kv=0,decreases by 86% as compared to the static condition forΦ=30o.the vertical seismic acceleration coeffcient also significantly affects the seismic bearing capacity factor. It was found that Nγe decreased by 84% when kh increased from 0.1 to 0.2 for k v=0 and it decreased by 95% when kv=kh for Φ =30o. With decrease in Φ from 40o to 30o, Nγe decreased by 68% for kh= kv=0.1. The proposed method can be used for seismic design of shallow strip foundations in sand.

Authors

Mojtaba Mousavi Ourimi

M.Sc. Student of Geotechnical Engineering, Department of Civil Engineering, Qum University of Technology, Iran

Mohsen Saleh Asheghabadi

PHD Student of Department of civil Engineering, Tsinghua University, Beijing ۱۰۰۰۸۴, China

Zulfiqar Ali

School of Civil, Environmental and Mining Engineering, The University of Adelaide, Australia

Morteza Jiryaei

Assistant Professor of Geotechnical Engineering, Department of Civil Engineering, Qum University of Technology, Iran