Enhancement of oxygen transfer and recombinant hG-CSF production in Pichia pastoris fed-batch fermentation

Publish Year: 1386
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,633

This Paper With 8 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

ICHEC05_119

تاریخ نمایه سازی: 7 بهمن 1386

Abstract:

The high cell density fermentation of recombinant Pichia pastoris for human granulocyte colony stimulating factor (hG-CSF) production is a high oxygen demand process. The oxygen demand is usually met by increased agitation rate and use of oxygen-enriched air. However, in this study by using a modified fermentation medium, we can supply adequate oxygen to the microorganisms at relatively lower agitation rates, because of improved oxygen mass-transfer. Conventional fermentations were conducted for the production of hG-CSF by P. pastoris at agitation rates of 1000-1200 rpm by using regular basal salt medium. By using extended modified salt medium, oxygen transfer was increased and agitation rate was decreased to 700 rpm. For two above fermentations, the final cell density and hG-CSF concentration reached to 100 ± 10 g/l and 25 ± 5 mg/l, respectively. When agitation rate was decreased from 1200 to 700 rpm for fermentation with BSA medium, the final cell density and hG-CSF concentration decreased to 60 g/l and 10 mg/l respectively. These results showed that, the medium composition is affected oxygen mass transfer and hG-CSF production in P. pastoris high cell density fed-batch fermentation.

Authors

Bahrami

Biotechnology Group, Chemical Engineering Department, Faculty of Engineering, Tarbiat Modares University, Tehran, Iran

Shojaosadati

Biotechnology Group, Chemical Engineering Department, Faculty of Engineering, Tarbiat Modares University, Tehran, Iran

Khalilzadeh

Institute of Biotechnology, Malek Ashtar University, Tehran, I.R. Iran.

Vasheghani Farahani

Biotechnology Group, Chemical Engineering Department, Faculty of Engineering, Tarbiat Modares University, Tehran, Iran