Model identification and dynamic analysis of ship propulsion shaft lines

Dynamic response analysis of mechanical structures is usually performed by adopting numerical/analytical models. Finite element (FE) modeling as a numerical approach plays an important role in dynamic response analysis of complex structures. The calculated dynamic responses from FE analysis areonly reliable if accurate FE models are used. There are many elements in real mechanical structures which make constructing accurate FE modelsdifficult. For example, modeling the boundary supports of mechanical structures are usually challenging because of the uncertainties existing intheir stiffness values. The stiffness values of boundary supports can be identified by using experimental natural frequencies and hence the FE model can be corrected. In this paper, the FE modeling and updating of propulsion shaft lines in a ship structure is considered by employing experimental modal parameters, i.e. natural frequencies. Natural frequencies of shaft lines are measured by performing experimental vibration testing. The corrected FE models are used and dynamic response analysis of shaft lines is conducted.

Keywords:

FE modeling , , Shaft line , Vibration measurement , Updating , , Campbell diagram ,