Study of Strains Distribution in Spinning Process Using FE Simulation and Experimental Work
Publish Year: 1384
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,630
This Paper With 9 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME07_122
تاریخ نمایه سازی: 6 آذر 1388
Abstract:
The spinning process is an advanced plastic working technology and is frequently used for manufacturing axisymmetric shapes. Spinning forming is continuous and partial deformation, so it is very difficult to control the shape, dimensions and precision of the finished parts. Because of high stress wave speed propagation, the FE analysis of spinning process is difficult. The software used is ABAQUS 6.4 which its advantage is using explicit dynamics FE formulation method. The results from the FE model are compared with experimental results obtained from NC spinning machine. The used material is commercially pure aluminium (1000 series).
Keywords:
Authors
H Razavi
M.Sc. student of Manufacturing Engineering, Amirkabir university of technology
F.R Biglari
Assistant professor, Mechanical Engineering Dept., Amirkabir university of technology
A Torabkhani
B.Sc. of Manufacturing Engineering, Amirkabir university of technology
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :