Mechanically activated synthesis of nanocrystalline ternary carbide Fe3Mo3C
Publish place: 02nd Conference on Nanostructures
Publish Year: 1386
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,592
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CNS02_032
تاریخ نمایه سازی: 11 اردیبهشت 1389
Abstract:
In this investigation, Fe3Mo3C ternary carbide has been synthesized from the elemental powders of 3Mo/3Fe/C by mechanical milling and heat treatment of mechanically activated powders. The structural evolutions of the powders were studied by X-ray diffraction (XRD). Results show that no phase transformation occurs during milling and the powders only activated. With increasing milling time to 70 hr no change takes place except grain size reduction to 9 nm and strain enhancement to 0.86 %. Heat treatment led to formation of Fe3Mo3C in the 70 hr milled sample at 700 C . With increasing temperature to 1100 C , two undesired phases (MoOC and Fe2C) form because of oxygen impurity of Argon. In the 10 hr milled sample that annealed at 700 C no transformation takes place
Keywords:
Authors
Mohammad Zakeri
Materials engineering department, Islamic Azad University (Saveh branch),
Abbas Khanmohammadian
Materials engineering department, Islamic Azad University (Saveh branch