PROPERLY DESIGN AND OPERATE MULTI-PIPE SLUG CATCHERS
Publish place: 01st Iranian Petroleum Engineering Congress
Publish Year: 1385
نوع سند: مقاله کنفرانسی
زبان: English
View: 3,576
This Paper With 11 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IPEC01_097
تاریخ نمایه سازی: 10 اردیبهشت 1386
Abstract:
A two-phase flow pipeline is intended for transporting the gas and liquid phases
simultaneously. There are different modes under which liquid can be produced from the
pipeline. These include: the continuous liquid flow production mode under normal steady
flow conditions; the intermittent or transient liquid production mode occurring when flow
rates are varied and the pigging or sphering mode when liquid is displaced within the
pipeline in a relatively short time. These occasionally very large volumes of liquids
encountered must be handled and stored as they emerge from the pipeline, preferably
without any reduction in velocity, which would be reflected in the gas production. For this
reason, a liquid-receiving facility known as a slug catcher is always connected to a twophase
pipeline. In this paper, rigorous modeling of multiple-pipe slug catcher based on
computational Fluid Dynamic (CFD) Calculations with ANSYS CFXTM is presented,
together with its application for debottlenecking of an existing multiple-pipe slug catcher.
Keywords:
Authors
A Bashiri
PhD Student, Iran University of Science and Technology
L Fatehnejad
Process Engineer, SAZEH Consultants Engineering & Construction
N Kasiri
Iran University of Science and Technology (IUST), Tehran, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :