Effects of carbon nanotube on the machining outputs of Ti-6Al-4V alloy in powder mixed EDM process
Publish Year: 1395
نوع سند: مقاله کنفرانسی
زبان: English
View: 650
This Paper With 10 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MECHCONF01_164
تاریخ نمایه سازی: 21 شهریور 1395
Abstract:
Carbon nanotubes (CNTs) have been utilized in different research areas because of their unique characteristics. In this study CNTs are mixed with dielectric in the EDM process to elevate efficiency of Ti-6Al-4V alloy machining, by means of copper electrodes.The effects of CNT mixed dielectric on the material removal rate (MRR), tool wear ratio (TWR) and surface quality of the work piece were investigated. Surface observations by scanning electron microscopy (SEM) revealed reduction of surface micro crack in presence of CNT particles in dielectric. It is revealed that adding of CNTs into dielectric exhibit considerable advantages in machining stability; reduces MRR and TWR. The findings obviously indicated that addition of these particles has decreased the surface roughness
Authors
Behnam Khosrozade
Department of Mechanical Engineering, University of Tabriz, Tabriz, Iran
Mohammadreza Shabgard
Department of Mechanical Engineering, University of Tabriz, Tabriz, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :