Conference information

پنجمین کنفرانس بین المللی کامپوزیت Fifth International Composite Conference

Venue: Tehran - Tehran

Date: 20 December 2016

Index date: 28 September 2018

Pages: 254

Papers:124

Conference national idCOMPOSIT05

Authors: 340 author

Keywords:

Fifth International Composite Conference papers

1. A Model to Assess Progressive Fatigue Damage in GFRP Composites with layup systems of [0/±45], [90/±45], and [0/±45/0] over StressCycles
Year: 1395Language: English
Authors: g.r Ahmadzadeh - Varvani-Farahani
Pages: 2
Conference paper
2. A Novel Analytical Model to Estimate Mode I Strain Energy Release Rate of an Adhesive-Interlayered DCB Specimen
Year: 1395Language: English
Authors: m.m shokrieh - a ebrahimi - a zeinedini
Pages: 2
Conference paper
3. A Novel Analytical Solution of the Energy Absorption of Fiber Bridging Zone of Unidirectional Composites under Mixed Mode I/II loading
Year: 1395Language: English
Authors: M.M Shokrieh - z daneshjoo - m fakoor
Pages: 2
Conference paper
4. A Study on Barrier Properties of Compatibilized Polyamide 12/Nanoclay/ Thermoplastic Elastomer Nanocomposites: A New Nanocomposite for Gas Tanks of Automobiles
Year: 1395Language: English
Authors: a naeim abadi - h garmabi
Pages: 2
Conference paper
5. A new damage model to predict orthotropic nonlinear behavior of woven glass-epoxy composite by experiment and iterative simulation
Year: 1395Language: English
Authors: M KASHFI - G.H Majzoobi - N Bonora - G Iannitti
Pages: 2
Conference paper
6. Analytical modeling for free vibration of functionally graded piezoelectric energy harvester with geometric nonlinearities
Year: 1395Language: English
Authors: m Derayatifar - m Tahani
Pages: 2
Conference paper
7. Buckling Behaviors of Variable Stiffness Composite Cylindrical Shell with Elliptical and Circular Cross Sections under External Hydrostatic Pressure
Year: 1395Language: English
Authors: Hossein nopour - Abdulreza Kabiri Ataabadi - محمود مهرداد شکریه
Pages: 2
Conference paper
8. Burst modeling of type IV high pressure storage vessel
Year: 1395Language: English
Authors: M Heidari-Rarani - M Ahmadi-Jebeli - E Baniasadi
Pages: 2
Conference paper
9. COMPARISON THE BEHAVIOR OF CONCRETE SLABS REINFORCED WITH FRP BARS AND CONCRETE SLABS REINFORCED WITH STEEL BARS UNDER CYCLIC LOADING
Year: 1395Language: English
Authors: Mostafa Rezvani Sharif - Bahare Gharib
Pages: 3
Conference paper
10. Challenges and approaches towards specifying nanomaterials
Year: 1395Language: English
Authors: Guanglu Ge
Pages: 1
Conference paper
11. Cohesive Zone Modeling of Delamination in Multilayer Composite Circuit Boards
Year: 1395Language: English
Authors: Saeed Akbari - Jan K. Spelt
Pages: 2
Conference paper
12. Comparing Mechanical Properties of Polymer Based Graded and non-Graded Materials Reinforced with Carbon Nano tubes
Year: 1395Language: English
Authors: S Moharrerzadeh Kurd - S Hassanifard
Pages: 2
Conference paper
13. Comparison between the tensile strength and micro hardness of Nano adhesives
Year: 1395Language: English
Authors: M JALALI - H khoramishad
Pages: 2
Conference paper
14. Computational Fluids Dynamics Simulation to Predict Vacuum Infusion Process
Year: 1395Language: English
Authors: m Sharifpur - m Mahdavi - j.p Meyer
Pages: 2
Conference paper
15. Crashworthiness of composite and aluminum thin-walled boxes-A numerical study
Year: 1395Language: English
Authors: M JAHANI - H BEHESHTI - M Heidari-Rarani
Pages: 2
Conference paper
16. Creep and Recovery Behaviors of Hybrid Graphene/CNT/Epoxy Nanocomposites
Year: 1395Language: English
Authors: z Shokrieh - m.m Shokrieh - z Zhang - z Zhao
Pages: 2
Conference paper
17. Design of Particulate Materials and Engineering Application
Year: 1395Language: English
Authors: Yunfa Chen
Pages: 1
Conference paper
18. Development of 3D Knitted Preform for Creating a Tjointmonolithic composite
Year: 1395Language: English
Authors: h Dabiryan - z Khorram Tousi - m.h Ghatrenabi
Pages: 2
Conference paper
19. Development of a durable superhydrophobic PVDF nanocomposite coating
Year: 1395Language: English
Authors: r jafari - m.a.m mohamed - m farzaneh
Pages: 2
Conference paper
20. Dynamic mechanical thermal analysis of cured epoxy resin by capsulated 1-methylimidazole curing agent for making advanced composites
Year: 1395Language: English
Authors: s.m Mozaffari - m.h Beheshty - s.m Mirabedini
Pages: 2
Conference paper
21. Dynamic response of multilayered composite conical shells subjected to lateral impulsive pressure loads
Year: 1395Language: English
Authors: m Zamani - a Davar - j Eskandari Jam
Pages: 2
Conference paper
22. Dynamic stability of grid stiffened composite cylindrical shells under harmonic exciting axial force
Year: 1395Language: English
Authors: m Alirezvani - a Davar - j Eskandari Jam
Pages: 2
Conference paper
23. Effect of Mixing Condition on Mechanical Properties of Compatibilized Polyamide 12/Nanoclay/Thermoplastic Elastomer Nanocomposites
Year: 1395Language: English
Authors: a naeim abadi - h garmabi
Pages: 2
Conference paper
24. Effect of Rolling Temperature on Mechanical Properties of Aluminum/SiC Metal Matrix Composite
Year: 1395Language: English
Authors: M Shakibaei Nasab - A.H JABBARI - M SEDIGHI
Pages: 2
Conference paper
25. Effect of Unsaturated Carboxylate and Nanoclay on Rheological and Morphological Properties of Composites Based on SBR
Year: 1395Language: English
Authors: n Hosseini Darabi - f Abbassi Surki - gh.r Bakhshandeh.
Pages: 4
Conference paper
26. Effect of thermal cycles on repairing the edge-cracked aluminum plates by using carbon/epoxy composite patches under tensile load
Year: 1395Language: English
Authors: s.m.r Khalili - a Sobhani
Pages: 2
Conference paper
27. Effects of functionalized graphene nanoplatelets on the flexural properties of basalt fiber/epoxy nanocomposite system
Year: 1395Language: English
Authors: s.n hosseini - m.h siadati - h Khosravi - r Eslami-Farsani
Pages: 2
Conference paper
28. Elastic Behavior of Self-Healing Composites using a Micromechanical Model
Year: 1395Language: English
Authors: M.M Shokrieh - i Zibaei
Pages: 2
Conference paper
29. Enhancement of adhesive joint strength via metallic bars embedded in the adhesive fillet
Year: 1395Language: English
Authors: E Esmaeili - S.M.J RAZAVI - M SAMARI - M.R Ayatollahi
Pages: 2
Conference paper
30. Evaluating microstructural characteristics and mechanical properties of AA 5083/SiCnp nanocomposite material
Year: 1395Language: English
Authors: H Tazari - M.H SIADATI
Pages: 3
Conference paper
31. Evaluating the effect of multi-walled carbon nanotubes on the mechanical performance of anisogrid composite panels under transverse loading
Year: 1395Language: English
Authors: a Shahrabi-Farahani - r Eslami-Farsani - h Khosravi
Pages: 2
Conference paper
32. Experimental and Numerical Analysis of Sandwich Composite Beam under Flexural Bending
Year: 1395Language: English
Authors: f Taheri-Behrooz - m Mansourinik
Pages: 2
Conference paper
33. Experimental investigation of nanofiber interleaving effect on impact response of GLARE
Year: 1395Language: English
Authors: h zarei - h bisadi - g Minak
Pages: 2
Conference paper
34. Experimental investigation of the influence of adding nanotubes on Mode I interlaminar fracture toughness of laminated composites
Year: 1395Language: English
Authors: M kermansaravi - Mohammad Hossein Pol - M. H. Seyd Kashi
Pages: 2
Conference paper
35. Experimental investigation of the influence of adding nanotubes on tensile mechanical properties of laminated composites
Year: 1395Language: English
Authors: M Kermansaravi - Mohammad Hossein Pol
Pages: 2
Conference paper
36. Experimental investigation on effects of addition of carbon nanotubes on QS-PS penetration in the glass/epoxy composite laminates
Year: 1395Language: English
Authors: M SADEGHI - M.H POL - S.M.H Seyedkashi
Pages: 2
Conference paper
37. Experimental investigation on effects of span ratios on QS-PST in glass/epoxy composite laminates
Year: 1395Language: English
Authors: M Sadeghi - M.H POL
Pages: 2
Conference paper
38. Experimental investigation on effects of the addition of carbon nanotubes on the mechanical properties of glass/epoxy composite laminates
Year: 1395Language: English
Authors: M SADEGHI - M.H POL - S.M.H Seyedkashi
Pages: 2
Conference paper
39. Experimental investigation on the energy absorption of self-healing composites subjected to impact loading
Year: 1395Language: English
Authors: gh.r Aghamirzadeh - s.m.r Khalili - r Eslami Farsani
Pages: 2
Conference paper
40. Experimental study of the single strap hybrid joint under static load
Year: 1395Language: English
Authors: s.m.r Khalili - m molahasani
Pages: 2
Conference paper
41. Experimental study on compressive strength of resin-epoxy composite reinforced with shape memory alloy fiber under static load and assessment of some effective parameters
Year: 1395Language: English
Authors: Nathan Jafarian Jam - Mirhossein Malayeri - S.M.R Khalili
Pages: 2
Conference paper
42. Experimental study on flexural and shear behavior of steel beams using carbon laminate
Year: 1395Language: English
Authors: m shekarchi - a.r khaloo
Pages: 2
Conference paper
43. Experimental study on tensile, compressive and flexural properties of epoxy nanocomposite at low graphene contents
Year: 1395Language: English
Authors: S ASADI - G.H LIAGHAT - A.R Bahramian
Pages: 2
Conference paper
44. Experimental study on the effect of stacking sequence of layers in the fiber metal laminates subjected to static and dynamic tests
Year: 1395Language: English
Authors: m sharafi - s.m.r khalili - a saeedi
Pages: 2
Conference paper
45. Fabrication and bending characterization of Cu-Fe FGM produced by powder metallurgy method
Year: 1395Language: English
Authors: s.m.r khalili - m Torabian - a Saeedi
Pages: 2
Conference paper
46. Fabrication of Aluminum Based Surface Composites using Hot Rolling Method
Year: 1395Language: English
Authors: M.R FAZELI - A.H Jabbari - M Sedighi
Pages: 2
Conference paper
47. Fabrication of Magnesium/Hydroxyapatite Bio-composite Using Stir Casting Method
Year: 1395Language: English
Authors: A Shafiee - A.H JABBARI - M SEDIGHI
Pages: 2
Conference paper
48. Fabrication, Characterization and Photocatalytic application of sol-gel derived MWCNT-ZnO hybrid nanomaterial
Year: 1395Language: English
Authors: S Hosseini Largani - M Akbarzadeh Pasha
Pages: 2
Conference paper
49. Facile synthesis of Graphene Oxide-Fe3O4 Nanoparticle Composites
Year: 1395Language: English
Authors: m Mosayebi - z Salehi. - a Khodadadi - p Tishbi
Pages: 4
Conference paper
50. Failure load prediction of steel-CFRP double strap joints under quasi-static tensile loading
Year: 1395Language: English
Authors: H.R MAJIDI - S.M.J RAZAVI - M.R Ayatollahi
Pages: 2
Conference paper

نتایج 1 تا 50 از مجموع 124

Fifth International Composite Conference papers

1. A Model to Assess Progressive Fatigue Damage in GFRP Composites with layup systems of [0/±45], [90/±45], and [0/±45/0] over StressCycles

2. A Novel Analytical Model to Estimate Mode I Strain Energy Release Rate of an Adhesive-Interlayered DCB Specimen

3. A Novel Analytical Solution of the Energy Absorption of Fiber Bridging Zone of Unidirectional Composites under Mixed Mode I/II loading

4. A Study on Barrier Properties of Compatibilized Polyamide 12/Nanoclay/ Thermoplastic Elastomer Nanocomposites: A New Nanocomposite for Gas Tanks of Automobiles

5. A new damage model to predict orthotropic nonlinear behavior of woven glass-epoxy composite by experiment and iterative simulation

6. Analytical modeling for free vibration of functionally graded piezoelectric energy harvester with geometric nonlinearities

7. Buckling Behaviors of Variable Stiffness Composite Cylindrical Shell with Elliptical and Circular Cross Sections under External Hydrostatic Pressure

8. Burst modeling of type IV high pressure storage vessel

9. COMPARISON THE BEHAVIOR OF CONCRETE SLABS REINFORCED WITH FRP BARS AND CONCRETE SLABS REINFORCED WITH STEEL BARS UNDER CYCLIC LOADING

10. Challenges and approaches towards specifying nanomaterials

11. Cohesive Zone Modeling of Delamination in Multilayer Composite Circuit Boards

12. Comparing Mechanical Properties of Polymer Based Graded and non-Graded Materials Reinforced with Carbon Nano tubes

13. Comparison between the tensile strength and micro hardness of Nano adhesives

14. Computational Fluids Dynamics Simulation to Predict Vacuum Infusion Process

15. Crashworthiness of composite and aluminum thin-walled boxes-A numerical study

16. Creep and Recovery Behaviors of Hybrid Graphene/CNT/Epoxy Nanocomposites

17. Design of Particulate Materials and Engineering Application

18. Development of 3D Knitted Preform for Creating a Tjointmonolithic composite

19. Development of a durable superhydrophobic PVDF nanocomposite coating

20. Dynamic mechanical thermal analysis of cured epoxy resin by capsulated 1-methylimidazole curing agent for making advanced composites

21. Dynamic response of multilayered composite conical shells subjected to lateral impulsive pressure loads

22. Dynamic stability of grid stiffened composite cylindrical shells under harmonic exciting axial force

23. Effect of Mixing Condition on Mechanical Properties of Compatibilized Polyamide 12/Nanoclay/Thermoplastic Elastomer Nanocomposites

24. Effect of Rolling Temperature on Mechanical Properties of Aluminum/SiC Metal Matrix Composite

25. Effect of Unsaturated Carboxylate and Nanoclay on Rheological and Morphological Properties of Composites Based on SBR

26. Effect of thermal cycles on repairing the edge-cracked aluminum plates by using carbon/epoxy composite patches under tensile load

27. Effects of functionalized graphene nanoplatelets on the flexural properties of basalt fiber/epoxy nanocomposite system

28. Elastic Behavior of Self-Healing Composites using a Micromechanical Model

29. Enhancement of adhesive joint strength via metallic bars embedded in the adhesive fillet

30. Evaluating microstructural characteristics and mechanical properties of AA 5083/SiCnp nanocomposite material

31. Evaluating the effect of multi-walled carbon nanotubes on the mechanical performance of anisogrid composite panels under transverse loading

32. Experimental and Numerical Analysis of Sandwich Composite Beam under Flexural Bending

33. Experimental investigation of nanofiber interleaving effect on impact response of GLARE

34. Experimental investigation of the influence of adding nanotubes on Mode I interlaminar fracture toughness of laminated composites

35. Experimental investigation of the influence of adding nanotubes on tensile mechanical properties of laminated composites

36. Experimental investigation on effects of addition of carbon nanotubes on QS-PS penetration in the glass/epoxy composite laminates

37. Experimental investigation on effects of span ratios on QS-PST in glass/epoxy composite laminates

38. Experimental investigation on effects of the addition of carbon nanotubes on the mechanical properties of glass/epoxy composite laminates

39. Experimental investigation on the energy absorption of self-healing composites subjected to impact loading

40. Experimental study of the single strap hybrid joint under static load

41. Experimental study on compressive strength of resin-epoxy composite reinforced with shape memory alloy fiber under static load and assessment of some effective parameters

42. Experimental study on flexural and shear behavior of steel beams using carbon laminate

43. Experimental study on tensile, compressive and flexural properties of epoxy nanocomposite at low graphene contents

44. Experimental study on the effect of stacking sequence of layers in the fiber metal laminates subjected to static and dynamic tests

45. Fabrication and bending characterization of Cu-Fe FGM produced by powder metallurgy method

46. Fabrication of Aluminum Based Surface Composites using Hot Rolling Method

47. Fabrication of Magnesium/Hydroxyapatite Bio-composite Using Stir Casting Method

48. Fabrication, Characterization and Photocatalytic application of sol-gel derived MWCNT-ZnO hybrid nanomaterial

49. Facile synthesis of Graphene Oxide-Fe3O4 Nanoparticle Composites

50. Failure load prediction of steel-CFRP double strap joints under quasi-static tensile loading

به اشتراک گذاری