Nano Assemblers include Nano Transistors and Nano Diodes, They Can be Used in Nano Robots, Nano Electromechanical Systems (NEMS)

Note: These nanodevices, which include nanotransistors and nanodiodes, can be used in nanometer robots, nanoelectromechanical systems (NEMS), microelectromechanical systems (MEMS), and microfluidic devices. The mechanical action required to initiate deformation can be the pressing of a key, the pressure caused by the passage of a fluid, the stretching of muscles, or the movement of a robot's limbs.

Different MEMS and NEMS should be designed according to the specifications, needs, goals and applications. Electromechanical and electromechanical MEMS and NEMS have been developed. Generally, optical systems are faster, simpler, more efficient, more reliable, and more durable than electromechanical systems.

Although optical systems  are designed for different applications (such as: communications, calculations and  wireless keying, etc.),  they have different configurations, in general it is very difficult to  make a comparative comparison between them. For example,  optical systems cannot be  used as stimuli. Application needs should be counted and  electromagnetic connections, temperature, vibration or   radiation can be factors used for  better construction. As another example, let's look  at nano and micro scale stimuli. The size of the actuator depends on the amount of force or torque that is a function of the material used and its size (volume). In fact, the size is determined by the required power and torque and its material  . It is very important that the electromagnetic MEMS integrates microstructures or microtransducers that are controlled by ICs used in radiant energy microdevices. In this way, microstructures and microtrans-diodes, radiant energy devices and ICs must be integrated. The technology of direct chip connection has advanced greatly. In particular, the chip-flip MEMS array was replaced with a wire strip to connect to ICs with micro-nano scale actuators and sensors. The use of chip-flip technology makes it possible to eliminate parasitic inductors, capacitors and resistors.  This issue leads to the modification of the device specifications. In the continuation of chip-flip integration, it leads to advantages in the implementation of advanced flexible packages, reliable improvements and reduction of weight and size, etc. integrated chip - flip, microtransdiodes can be mounted with the raised and facing down on layers that are mounted on electromechanical devices and connected to the base of the IC Large-scale integrated MEMS (a chip that can be mass-produced And with a low cost that is used in COMS.

Conclusion :

These nanodevices, which include nanotransistors and nanodiodes, can be used in nanometer robots, nanoelectromechanical systems (NEMS), microelectromechanical systems (MEMS), and microfluidic devices. The mechanical action required to initiate deformation can be the pressing of a key, the pressure caused by the passage of a fluid, the stretching of muscles, or the movement of a robot's limbs.