Determination of Stress Intensity factors in a Half-plane with vertical edge crack which is subjected to an Un-symmetrical tilted wedge by means of Digital Shearography
Publish place: 19th Annual Conference on Mechanical Engineering (ISME2011)
Publish Year: 1390
نوع سند: مقاله کنفرانسی
زبان: English
View: 2,660
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME19_353
تاریخ نمایه سازی: 2 اردیبهشت 1390
Abstract:
In this research, digital Shearography as a nondestructive technique is applied to determine mixed mode stress intensity factors in a Half-plane with vertical edge crack which is subjected to an unsymmetrical tilted wedge. Optical setup with two inplane illumination source is used to determine purposed strain variable and consequently obtain the mixed mode stress intensity factors as a result of applying linear elastic fracture mechanics (LEFM). The results of Shearography technique contains some fringes which contain the information needed to obtain the strain variables. To utilize the advantage of whole field Shearography and to minimize random experimental errors, the least square method is used to obtain SIFs. The difference between two results is nearly 20%. The comparison of the experimental results and the numerical results proves the credibility and potential of this non-destructive method in measurement applications
Keywords:
Authors
Danial ghahremani moghadam
Mech.Eng.Department, Tehran University
naser soltani
Mech.Eng.Department, Tehran University
hadi sanati
Mech.Eng.Department, Tehran University
abolghasem mohammadpour
metallurgy and material.Eng.Department, Tehran University