ISI Papers
- "Effects of thermal cycles on mechanical properties of an optimized polymer concrete", Elsevier BV, (2011), Vol 25, No 8: 3540-3549
- "Effect of stacking sequence on R-curve behavior of glass/epoxy DCB laminates with 0°//0° crack interface", Elsevier BV, (2011), Vol 529, No : 265-269
- "Calculation of for a multidirectional composite double cantilever beam on two-parametric elastic foundation", Elsevier BV, (2011), Vol 15, No 7: 534-543
- "Simulation of mode I delamination propagation in multidirectional composites with R-curve effects using VCCT method", Elsevier BV, (2012), Vol 65, No : 66-73
- "Interlaminar fracture toughness of unidirectional DCB specimens: A novel theoretical approach", Elsevier BV, (2012), Vol 31, No 1: 68-75
- "Influence of curved delamination front on toughness of multidirectional DCB specimens", Elsevier BV, (2012), Vol 94, No 4: 1359-1365
- "Delamination R-curve as a material property of unidirectional glass/epoxy composites", Elsevier BV, (2012), Vol 34, No : 211-218
- "Free vibration analysis of a non-uniform cantilever Timoshenko beam with multiple concentrated masses using DQEM", Growing Science, (2013), Vol , No : 9-20
- "Finite element modeling of mode I delamination growth in laminated DCB specimens with R-curve effects", Elsevier BV, (2013), Vol 45, No 1: 897-903
- "Mechanical durability of an optimized polymer concrete under various thermal cyclic loadings – An experimental study", Elsevier BV, (2014), Vol 64, No : 308-315
- "Free vibration analysis of a composite beam with single delamination- An improved free and constrained model", Growing Science, (2014), Vol 2, No 4: 313-320
- "Effect of ply stacking sequence on buckling behavior of E-glass/epoxy laminated composites", Elsevier BV, (2014), Vol 89, No : 89-96
- "Effect of initial crack length on the measured bridging law of unidirectional E-glass/epoxy double cantilever beam specimens", Elsevier BV, (2014), Vol 55, No : 605-611
- "Strain gradient shell model for nonlinear vibration analysis of visco-elastically coupled Boron Nitride nano-tube reinforced composite micro-tubes conveying viscous fluid", Elsevier BV, (2015), Vol 96, No : 448-458
- "Multiscale finite element analysis of mode I delamination growth in a fabric composite", Elsevier BV, (2015), Vol 133, No : 157-165
- "Bending analysis of a general cross-ply laminate using 3D elasticity solution and layerwise theory", Springer Science and Business Media LLC, (2015), Vol 7, No 4: 329-340
- "A new finite element method for modeling delamination propagation without additional degrees of freedom", Elsevier BV, (2016), Vol 147, No : 82-98
- "Experimental and theoretical investigation on transverse vibration of delaminated cross-ply composite beams", Elsevier BV, (2016), Vol 115-116, No : 1-11
- "Effect of interface fiber angle on the R-curve behavior of E-glass/epoxy DCB specimens", Elsevier BV, (2016), Vol 86, No : 153-160
- "Axial buckling response of fiber metal laminate circular cylindrical shells", Techno-Press, (2016), Vol 57, No 1: 45-63
- "Variational Iteration Method for Free Vibration Analysis of a Timoshenko Beam under Various Boundary Conditions", International Digital Organization for Scientific Information (IDOSI), (2017), Vol 30, No 10:
- "Moving support technique for delaminatoin detection in laminated composite beams using the first natural frequency", SAGE Publications, (2017), Vol 36, No 15: 1116-1128
- "Dependency of bridging traction of DCB composite specimen on interface fiber angle", Elsevier BV, (2017), Vol 90, No : 22-32
- "Appropriate shape of cohesive zone model for delamination propagation in ENF specimens with R-curve effects", Elsevier BV, (2017), Vol 90, No : 174-181
- "Micromechanics based damage model for predicting compression behavior of polymer concretes", Elsevier BV, (2018), Vol 117, No : 126-136
- "Micromechanical modeling of the mechanical behavior of unidirectional composites – A comparative study", SAGE Publications, (2018), Vol 37, No 16: 1051-1071
- "An analytical approach for local buckling analysis of initially delaminated composite thin-walled columns with open and closed sections", Informa UK Limited, (2016), Vol 27, No 1: 85-105
- "Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites", Elsevier BV, (2019), Vol 175, No : 107147
- "Electric field effect on dynamic analysis of smart porosity-dependent nanocomposite sandwich plate resting on silica aerogel foundation considering carbon nanotubes agglomeration", SAGE Publications, (2019), Vol 30, No 18-19: 2651-2669
- "Mechanical characterization of a flexible epoxy adhesive for the design of hybrid bonded-bolted joints", Elsevier BV, (2019), Vol 79, No : 106048
- "Finite element modeling strategies for 2D and 3D delamination propagation in composite DCB specimens using VCCT, CZM and XFEM approaches", Elsevier BV, (2019), Vol 103, No : 102246
- "Experimental study of collapse mode and crashworthiness response of tempered and annealed aluminum tubes under axial compression", Springer Science and Business Media LLC, (2019), Vol 33, No 5: 2067-2074
- "Delamination R-curve behavior of curved composite laminates", Elsevier BV, (2019), Vol 175, No : 107139
- "Effect of adhesive layer compliance on strength of single-lap hybrid bonded-bolted joints", Elsevier BV, (2021), Vol 261, No : 113324
- "Thickness effect study on the crushing characteristics of aluminum and composite tubes: Numerical analysis and multi-objective optimization", Informa UK Limited, (2020), Vol 28, No 24: 2585-2594
- "Optimization of FDM process parameters for tensile properties of polylactic acid specimens using Taguchi design of experiment method", SAGE Publications, (2020), Vol 35, No 12: 2435-2452
- "Multi-Objective Optimization of Hybrid Aluminum–Composite Tube Under Axial Crushing", World Scientific Pub Co Pte Lt, (2020), Vol 12, No 04: 2050042
- "An XFEM-VCCT coupled approach for modeling mode I fatigue delamination in composite laminates under high cycle loading", Elsevier BV, (2021), Vol 249, No : 107760
- "The effect of recycled PET bottles on the fracture toughness of polymer concrete", Elsevier BV, (2021), Vol 25, No : 100684
- "A parametric study on static behavior and load sharing of multi-bolt hybrid bonded/bolted composite joints", Elsevier BV, (2021), Vol 217, No : 108897
- "Development of Abaqus WCM plugin for progressive failure analysis of type IV composite pressure vessels based on Puck failure criterion", Elsevier BV, (2022), Vol 131, No : 105851
- "Influence of geometric parameters on free vibration behavior of an aluminum honeycomb core sandwich beam using experimentally validated finite element models", SAGE Publications, (2021), Vol 24, No 2: 1449-1469
- "A novel graded auxetic honeycomb core model for sandwich structures with increasing natural frequencies", SAGE Publications, (2021), Vol 24, No 2: 1313-1339
- "Three-dimensional progressive damage and failure analysis of double-lap composite bolted joints under quasi-static tensile loading", Elsevier BV, (2022), Vol 285, No : 115227
- "Effect of lamina fiber orientation interfaced with semi-flexible adhesive layer on strength and failure mode of composite single-lap joints", Elsevier BV, (2022), Vol 118, No : 103232
- "A micromechanical damage-healing model for encapsulation-based self-healing polymer composites under tensile loading", Informa UK Limited, (2023), Vol , No : 1-14
- "Optimal design of broadband radar-absorbing composite structures based on different compositions, processing, and geometric parameters", SAGE Publications, (2022), Vol 42, No 9-10: 430-445
Conference Papers
- Influence of nozzle diameter and temperature on the tensile properties of FDM ۳D printedspecimens produced by homemade PLA filaments ارائه شده در The 31st annual conference between Iran Mechanical Engineering and the 9th Iran Power Plant Industry Conference (1402)
- مقایسه تغییر شکل خمشی تابع دما نمونه های چاپ سه بعدی شده از جنس پلی لاکتیک اسید و آکریلونیتریل بوتادین استایرن ارائه شده در The 19th National Conference and the 8th International Conference on Construction and Production Engineering of Iran (1401)
- مطالعه اثرات پارامترهای ناحیه ی چسبناک بر رفتار رشد تورق در چندلایه های کامپوزیتی ارائه شده در 28th Annual Conference of Mechanical Engineering (1399)
- مقایسه ایرفویل های مختلف در طراحی پره توربین بادی مقیاس کوچک کامپوزیتی با استفاده از نرم افزار Q-Blade ارائه شده در Composite Application in Technology Conference (1399)
- پیش بینی سفتی کششی کامپوزیت تقویت شده با الیاف کوتاه به روش میکرومکانیک ارائه شده در Composite Application in Technology Conference (1399)
- حل تحلیلی گذرای سه بعدی میدان دمایی یک اتصال جوشی لب به لب ارائه شده در 24th Annual Conference of Mechanical Engineering (1398)
- تعیین چیدمان مناسب در چندلایه های کامپوزیتی تحت بارگذاری درون صفحه ای با استفاده از روش تجزیه مقادیر تکین ارائه شده در 24th Annual Conference of Mechanical Engineering (1398)
- تحلیل المان محدود ارتعاشات آزاد یک تیر ساندویچی با هسته لانه زنبوری آلومنیومی با در نظر گرفتن اثرات چسب در هسته ارائه شده در 9th International Conference on Acoustic and Vibration (1398)
- مقایسه روش های مختلف مدل سازی المان محدود رشد تورق در چندلایه های کامپوزیتی ارائه شده در 25th Annual Conference of Mechanical Engineering (1396)
- مدل سازی رشد تورق در نمونه های تیر یک سرگیردار دولبه انحنادار ارائه شده در International Conference on Mechanics of Advanced Materials and Equipment (1396)
- طراحی یک قید و بست برای بارگذاری دو محوره نمونه های کامپوزیتی توسط دستگاه کشش تک محوره ارائه شده در 13th Iran Engineering Manufacturing Conference (1395)
- پیش بینی شروع و رشد مود دوم تورق در کامپوزیت های تک جهته به کمک المان های چسبناک ارائه شده در The 22nd Annual International Conference on Mechanical Engineering (1393)
- بررسی نیمه تحلیلی و عددی انتقال حرارت در پوسته مخروطی ناقص ارائه شده در The Second International Conference on New Achievements in Engineering and Basic Sciences (1393)
- حل دقیق انتقال حرارت گذرا درلوله های انتقال دهنده نفت و گاز ارائه شده در The first international oil, gas and petrochemical conference with sustainable development approach (University relationship with industry) (1393)
- تعیین تجربی چقرمگی شکست مد I بینلایهای در چندلایههای کامپوزیتی تکجهته ارائه شده در 19th Annual Conference on Mechanical Engineering (ISME2011) (1390)
- طراحی و ساخت صفحات تصفیه آب آشامیدنی با استفاده از بتن پلیمری ارائه شده در 1st National Conferece in Non osmosis concrets - Water storage Tank (1390)
- مدلی جدید برای تعیین چقرمگی شکست مودI تورق در قطعه DCB با استفاده از مدل تیرتیموشنکو برروی بستر الاستیک دو پارامتری ارائه شده در 18th Annual Conference of Mechanical Engineering (1389)
- تعیین چقرمگی شکست بین لایه ای درقطعه DCB چندجهته در مود I با استفاده از روش معادلسازی لایه ها ارائه شده در 10th Conference of Iranian Aerospace Society (1389)
- ارائه الگوی بازنمایی فعالیت های یک ماهواره در نرم افزار سیستم هوشمند ارائه شده در The 8th Conference of Iranian Aerospace Society (1388)
Journal Papers
- مطالعه تجربی تاثیر پارامترهای مختلف ساخت بر خواص کششی نمونههای PLA چاپشده به روش مدلسازی رسوب ذوبشده منتشر شده در Journal of Science and technology of composites (1399)
- بازسازی تصاویر حرارتی و به کارگیری روش خوشه بندی K جهت عیب یابی قطعات پلیمری ساخت افزایشی منتشر شده در Nondestructive Testing Technology (1399)
- به کارگیری روش های پردازش تصاویر حرارتی به منظور بهبود شناسایی عیوب قطعات تولیدشده به روش ساخت افزایشی منتشر شده در Nondestructive Testing Technology (1399)
- حل دقیق براى معادلات فرکانسى ارتعاشات آزاد شعاعى و عرضى یک ورق دایره اى با شرایط مرزى مختلف منتشر شده در Journal Of Modeling in Engineering (1396)
- تاثیر محرک های مختلف لبه بر رفتار تصادم یک جعبه تصادف کامپوزیتی منتشر شده در Journal of Science and technology of composites (1396)
- بررسی تئوری و تجربی تاثیرات تورق بر پارامترهای ارتعاشی تیر کامپوزیتی متعامد متقارن منتشر شده در Journal of Science and technology of composites (1395)
- حل تحلیلی ارتعاشات آزاد نانو ورق دولایه تقویت شده با نانولوله های کربنی مدرج تابعی واقع در بستر الاستیک منتشر شده در Journal of Science and technology of composites (1394)
- تاثیر چیدمان لایه ها بر مود دوم نرخ رهایی انرژی کرنشی در قطعه ENF کامپوزیتی منتشر شده در Journal of Computational Methods in Engineering (1393)